37 in 1 Sensor Kit Compatible with Arduino UNO, NodeMcu, Raspberry Pi, Robotics Projects

Price 870.0 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

37 in 1 Sensor Kit Compatible with Arduino UNO, NodeMcu, Raspberry Pi, Robotics Projects Specification

Sensor Type
Massive collection including digital Hall effect, linear thermistors, ultrasonic, photoresistors, flame sensors

Operating Temperature
-10 to +60 Celsius (oC)

Cable Length
Breakout layout compatible with standard Female-to-Female & Male-to-Female Jumper Wires Millimeter (mm)

Application
STEM Robotics Centers, Electronics Engineering R&D, University Innovation Hubs

Interface
Standardized 2.54mm (0.1 inch) Pitch Header Pins (Plug-and-play into breadboards)

Product Type
Educational Electronics / Sensor Modules

Power Rating
Micro-power sensory operation (Typical module current < 20mA; Relay peak < 120mA)

Input
3.3V DC to 5.0V DC (Optimized for both low-power ESP8266 and standard 5V AVR logic)

Output
Micro-power sensory operation (Typical module current < 20mA; Relay peak < 120mA)

Function
Physical Computing, Multi-Sensor Data Acquisition, Microcontroller Interfacing

Usage
Internet of Things (IoT) Prototyping, Embedded System Coding, Sensor Calibration Labs

Voltage
5V DC Volt (v)

Weight
350 Grams (g)

Usage & Applications
Internet of Things (IoT) Prototyping, Embedded System Coding, Sensor Calibration Labs. STEM Robotics Centers, Electronics Engineering R&D, University Innovation Hubs.

Cable Type
Breakout layout compatible with standard Female-to-Female & Male-to-Female Jumper Wires

Phase
Single-Phase DC Logic Control Bus Architecture

Display Type
Non-Display Component Array (Includes discrete multi-color and flashing LED modules)

Conductor
High-Conductivity Tinned Copper Circuit Traces

Material
Premium FR4 Flame-Retardant Glass-Epoxy Double-Sided PCBs

Frequency
Interfacing depends on communication protocols: Analog, Digital, I2C, SPI, or One-Wire Hertz (HZ)

About 37 in 1 Sensor Kit Compatible with Arduino UNO, NodeMcu, Raspberry Pi, Robotics Projects

The REES52 37-in-1 Sensor Kit is an essential, comprehensive electronic component suite engineered for rapid hardware prototyping, academic training, and IoT development. This universally compatible kit contains 37 distinct functional modules neatly arranged on standardized, breadboard-friendly 2.54mm pitch breakout PCBs. It includes highly accurate environmental sensors (temperature, tracking, soil, and gas indicators), dynamic user-interface buttons, telemetry modules, and active indicators like multi-color RGB LEDs, buzzers, and relays. Designed to bridge the gap between abstract code and physical computing, it offers a seamless interface with popular microcontrollers and IoT platforms including the Arduino UNO, Mega2560, NodeMCU ESP8266, and Raspberry Pi, making it a staple product for engineering colleges, STEM labs, and firmware developers.

Complete 37-in-1 Sensor Module Breakdown Matrix

This premium kit contains the following 37 functional sensor and actuator breakout modules:

KY-001 Temperature Sensor Module (DS18B20 Digital One-Wire)
KY-002 Vibration Switch Module
KY-003 Hall Magnetic Sensor Module
KY-004 Key Switch Module (Tactile Push Button)
KY-005 Infrared (IR) Emission Transmitter Module
KY-006 Passive Piezo Buzzer Module
KY-008 Laser Transmitter Module (650nm Red Laser Dot)
KY-009 3-Color Full-Color RGB LED SMD Module
KY-010 Optical Broken Module (Light Blocking Photo-Interrupter)
KY-011 2-Color Dual LED Module (Red/Green 5mm)
KY-012 Active Piezo Buzzer Module (Built-in internal frequency generator)
KY-013 Analog Temperature Sensor Module (NTC Thermistor)
KY-015 Temperature & Humidity Sensor Module (DHT11 Controller)
KY-016 3-Color RGB LED Module (Through-Hole 5mm with Resistors)
KY-017 Mercury Tilt Switch Module
KY-018 Photoresistor Module (LDR Light Dependent Resistor)
KY-019 5V Single-Channel Relay Module (AC 250V 10A / DC 30V 10A rating)
KY-020 Tilt Switch Module (Ball Bearing Orientation Sensor)
KY-021 Mini Magnetic Reed Switch Module
KY-022 Infrared (IR) Receiver Module (38KHz frequency for remote controls)
KY-023 Dual-Axis XY Joystick Module
KY-024 Linear Magnetic Hall Sensor Module
KY-025 Large Magnetic Reed Switch Module
KY-026 Flame Detection Sensor Module (Infrared wavelength sensor)
KY-027 Magic Light Cup Module Set (2 pieces included)
KY-028 Digital Temperature Sensor Module (Thermistor with LM393 Comparator)
KY-029 2-Color Dual LED SMD Module
KY-031 Knock Sensor Module
KY-032 Infrared Obstacle Avoidance Sensor Module
KY-033 Infrared Tracking/Line Finder Sensor Module
KY-034 7-Color Automatic Flashing LED Module
KY-035 Analog Magnetic Hall Sensor Class
KY-036 Metal Touch Sensor Module (Human skin capacitance trigger)
KY-037 High-Sensitivity Microphone Sound Sensor Module
KY-038 Small Microphone Voice Acoustic Sensor Module
KY-039 Heartbeat/Pulse Detection Sensor Finger Clip Module
KY-040 360-Degree Rotary Encoder Module

Frequently Asked Questions (FAQs)

Q1: Does this kit include the main Arduino UNO or NodeMCU microcontroller board?

A: No, this is a specialized multi-sensor and actuator expansion kit. Microcontrollers like the Arduino UNO, NodeMCU, or ESP32 must be purchased separately.

Q2: Is code provided to run these 37 individual sensors?

A: Yes. Since this is an official REES52 distribution kit, it fully aligns with the open-source community libraries. Comprehensive library references and standardized sample codes are easily accessible for the Arduino IDE.

Q3: Can these modules be used directly with a breadboard?

A: Yes, absolutely. Every module is equipped with a standard 2.54mm pitch male header connector, meaning they can plug directly into a standard breadboard or connect via standard Dupont jumper wires.

Tell us about your requirement